Installation Method
Straight Partition
When both ends of the rail can be
securedto the wall, use Wall Brackets
for installation. If the rail is longer
than 1.5 m (59"), use Hanger Rods at
intervals of 1.5 m (59") or less.
If one end of the rail can not be
secured to the wall, hang Adjustable
Hanger Rods in a V type suspension
to prevent swinging. If the rail is
longer than 1.5 m (59"), also
install Hanger Rods at intervals of
1.5 m (59") or less. (For Fixed
hanger Rods 350 and 500, hang at
intervals of 1.0 m/39" or less.)
When a T Type Curved Connector
is used, install the Hanger Rod as
shown below.
Curved Partition
For partitions using a curved rail, be sure
to use Hanger Rods in a V type
suspension in corners. If the rail is longer
than 1.5 m (59"), also install Hanger
Rods at intervals of 1.5 m (59") or less.
If one end of the rail is not secured to
the wall, use Hanger Rods in a tripod
type suspension to prevent back/forth,
right/left swinging.
For a single-curve installation, clamp
the rails at a joint using a Curved
Connector B, and suspend the rails
with Hanger Rods. (Place the rails
to overlap by 100 mm/3.9".)
When using a double-curve
installation, clamp the rails
with two Double Connectors
and suspend the rails with
Hanger Rods as shown in
the figure.
Rails
Partrac II Rails
| Silver | White |
 |
 |
| Size | Product Code | ||
| Silver | White | ||
| 1.82 m (72") | 00230027 | 00230067 | |
| 2.00 m (79") | 00230026 | 00230068 | |
| 2.50 m (98") | 00230025 | 00230069 | |
| 2.73 m (107") | 00230024 | 00230070 | |
| 3.00 m (118") | 00230023 | 00230071 | |
| 4.00 m (157") | 00230022 | 00230072 | |
| Curved Rail (180mm R /7.1"R) |
0.40 m x 0.40 m (16" x 16") |
00230020 | 00230074 |
| 0.91 m x 0.91 m (36" x 36") |
00230019 | 00230073 | |
