Roller Blind
Mytec 01
- Two standard systems are available: Mytec 01 Loop, the Chain Drive System with a spring assist mechanism, and Mytec 01, the Spring Drive System with a speed control mechanism.
- A variety of optional parts: Top Box type, Side Frame type, Guide Wire type, Link type and Double type.
- The Speed Controller installed in the Spring Drive System, Mytec 01 prevents the blind from going up rapidly.
Feature
Light and smooth operation.
Mytec 01 Loop incorporates the spring assisted mechanism in its Chain Drive System and Mytec 01 equips the Speed Controller with its Spring Drive System.
These two systems enable light and smooth operation of the blind.
Chain Drive System
The spring assisted mechanism allows you to operate the blind with ease even for a large or tall windows.
Spring Drive System
Just pull down the pull ball or the pull grip, and the blind stops at anywhere you want.
To raise the screen, pull the pull ball or the pull grip just a little. The blind rolls up at the same speed without acceleration.
The Speed Controller installed in the Spring Drive System, Mytec 01 prevents the blind from going up rapidly.
Lineup
Most parts can be commonly used, resulting in decrease of inventory.
Key parts including Roller Pipe and Weight Bar can be commonly used for all types of the products.
It, therefore, realizes high working efficiency during assembly and decrease of inventory risk.
Mytec 01 Loop
Side Bracket Type
Mytec 01 Loop
Set Bar Type
- Metal chain is standard but plastic one is optionally available.
- Blinds up to 2700 mm (106") width and 3000 mm (118") height with 3.7 kg (8.2 lb) screen weight are possible.
- The spring assist mechanism attached makes for light operation even on large windows.
- Chain choice can be brass, stainless steel or plastic.
- Link type, double type, and four color variations are available for Side Bracket type only.
- With Set Bar Type, one person can install the blind by him or herself.
Install the brackets first and then snap the blind onto the brackets.
- The bracket can be obscured by installing the bracket back and forth opposite, when setting it up.
Mytec 01
Side Bracket Type
Mytec 01
Set Bar Type
- No crash at the top. A speed controller is standard for the spring drive system,enabling the blind to go up at a constant speed.
- No irritation to stop the blind.
The mechanism assures you to stop the blind anywhere at your discretion. - A stop controller is optional. It is a perfect solution to setting the upper limit position.
- With Set Bar Type, one person can install the blind by him or herself. Install the brackets first and then snap the blind onto the brackets.
- The bracket can be obscured by installing the bracket back and forth opposite, when setting it up.